Torno CNC Con Herramientas Vivas Torno CNC Lathe Machine Price CNC Lathe C Axis

 

CNC-508 CNC lathe adopts high-strength heavy duty cast iron, compact structure, good strength, proper hardness, low friction coefficient, and self-lubricating. The integral box structure of the base bed greatly enhances the overall rigidity and stability of the machine tool. It has the function of absorbing vibration, which reduces tool loss and improves the quality of the workpiece. It provides users with a guarantee of high efficiency and high reliability in use.
 

 

1. The 30° inclined layout greatly improves the bending and torsion rigidity of the machine tool at work. The integrated bed base with high rigidity and high stability provides a strong guarantee for the high precision of the whole machine.

2. The spindle unit is an independent spindle (sleeve type). The high-precision spindle system has undergone rigorous dynamic balance testing, with high precision, good accuracy retention, and good thermal stability. The maximum speed can reach 4000rpm. The high precision, high rigidity, high speed and high efficiency of the spindle unit enable the whole machine to not only finish finishing, but also to perform rough machining and heavy cutting for users.

3. The tailstock is hydraulically driven, and the sleeve automatically expands and contracts with good rigidity. Users can use the panel or foot switch to control it, which saves time and effort and provides high efficiency for machine tool processing.

4. The standard configuration of  TJ servo turret provides users with convenient, practical and reliable machining parts.

C axis wth live tool 

5. The feed system is directly driven by a servo motor with good rigidity, precision and dynamic response characteristics. The machine tool is equipped with Taiwan HIWIN/THK screw guide rail, and the maximum rapid movement speed can reach: 24m/min.
6. This machine provides users with a complete hydraulic and lubrication system, using high-quality hydraulic pumps and hydraulic valves and other components to greatly reduce the failure rate. The machine tool adopts centralized quantitative automatic lubrication.

7.control system FANUC 0ITD/SYNTEC /GSK for your choice !


 STANDARD ACCESSORIES

1.Total Splash Guard
2.X/Zaxis linear guideways
3.Taiwan  Hinwin/PMI ball screw 
4.Cutting cooling system              
5.Central auto-lubrication system
6..Heat exchanger for electric cabinet
7.Manual pulse generator
8.RS232C Interface
9.Working light
10.Indicator light of pause and completion      
11.Automatic switched off power supply M30
12.Basic tool box
13.Leveling bolts and blocks
14.Hydraulic chuck
15.Soft claw
16.Hydraulic tailstock
17.12-station servo turret

OPTIONAL ACCESSORIES 

1. Chain waste conveyor and car
2. Electric box air conditioner
3. Oil and water separation unit
4. Oil mist collection and separation
5. Automatic door
6.  RENISHAW automatic tool  setter(Auto)
7. Automatic Parts Catcher
8. 2-axis optical ruler
9. Hard claw
10.Bar Feeder
11.Automatic robot arm (robot) ,FMS


6 problems that must be paid attention to when the CNC lathe of the CNC machining center is clamped at one time!

1. Reasonable selection of cutting amount

Whether the selection of cutting amount (ap, f, v) is reasonable plays an important role in whether the potential of the machine tool and the cutting performance of the tool can be fully utilized, and the realization of high quality, high yield, low cost and safe operation is very important. CNC machining center

When rough turning, first consider selecting a larger back-cut amount ap, secondly choose a larger feed amount f, and finally determine a suitable cutting speed v. Increasing the back engagement amount ap can reduce the number of tool passes, and increasing the feed rate f is conducive to chip breaking. Therefore, selecting the amount of rough turning according to the above principles is beneficial to improve production efficiency, reduce tool consumption, and reduce processing costs.

When finishing turning, the machining accuracy and surface roughness are required to be high, and the machining allowance is small and uniform. Therefore, when selecting the cutting amount for finishing turning, we should focus on how to ensure the processing quality, and on this basis, try to improve productivity. Therefore, small (but not too small) back-engagement amount ap and feed amount f should be selected during finishing, and tool materials with high cutting performance and reasonable geometric parameters should be selected to increase the cutting speed v as much as possible.


2. Reasonable choice of tools

1) When rough turning, a tool with high strength and good durability should be selected, so as to meet the requirements of large amount of knife and large feed during rough turning;

2) When finishing turning, tools with high precision and good durability should be selected to meet the requirements of machining accuracy. ;

3) In order to reduce tool change time and facilitate tool setting, machine-clamped knives and machine-clamped blades should be used as much as possible.

3. Reasonable selection of fixtures

1) Try to use general fixtures to clamp the workpiece, and avoid using special fixtures;

2) The positioning datum of the parts is coincident to reduce the positioning error.

4. Determine the processing route

The machining route is the movement track and direction of the tool relative to the part during the machining process of the index-controlled machine tool:

1) It should be able to ensure the machining accuracy and surface roughness requirements;

2) The processing route should be shortened as much as possible to reduce the idle travel time of the tool.

5. The connection between machining route and machining allowance

At present, under the condition that the CNC lathe has not yet reached the popular use, the excessive allowance on the blank, especially the allowance containing the forged and cast hard skin layers, should be arranged on the ordinary lathe for processing. If it must be processed with a CNC lathe, it is necessary to pay attention to the flexible arrangement of the program.

6. Fixture installation points

At present, the connection between the hydraulic chuck and the hydraulic clamping cylinder is realized by a pull rod. The main points of hydraulic chuck clamping are as follows: first, remove the nut on the hydraulic cylinder of the CNC machining center with a wrench, remove the pull tube, and pull it out from the rear end of the spindle, and then use the wrench to remove the chuck fixing screw, and then remove it. chuck.
 

Packing :standard export packing 

delivery time : 45days after delosit 

 

Dongguan JIDE Precision Machinery Co., Ltd. was established, headquartered in the famous international manufacturing city, the global mold manufacturing centre Dongguan, Guangdong. It is a professional manufacturer and sales of /CNC lathe machine/CNC milling machine/5 axis CNC machine center/double-column CNC gantry machine . Gather independent design, research and development, production. Sales and trade are integrated. The company adheres to the business philosophy of "integrity development, steady quality", and strives to build a world brand of Chinese machinery. CNC machines are widely used in the manufacturing of hardware precision parts, moulds, electronic products and many other fields. The main advantages increase customer productivity and efficiency and are favoured by customers all over the world. Strive to move towards a higher management level, better product quality, and better service. Our Factory The company The factory has high-end processing and testing equipment from imported Japan and Germany and Europe etc.for making sure the machine in production .